If your PCSpecialist Fusion 16 has a broken screen, will not charge, runs hot or will not start, we can diagnose and repair it at our Bermondsey workshop. It is a 16-inch gaming laptop from 2022. Both the drive and, on most configurations, the memory can be upgraded, which makes it a good candidate for a refresh.
- Model number
- Fusion 16
- Released
- 2022
- Type
- Gaming laptop
- Screen
- 16-inch
- Storage
- M.2 SSD, two slots on most configurations
- Memory
- SODIMM slots
What we repair on the PCSpecialist Fusion 16
Screen replacement
We replace the 16-inch panel with one that matches the original resolution and refresh rate. A cheaper 60Hz panel will physically fit many gaming laptops, and we do not fit one unless you ask for it.
Price confirmed before work starts
Overheating and fan repair
A thermal service covers fresh compound on the processor and graphics chip, new thermal pads where needed and both fans cleaned. It is the usual cure for throttling and loud fans under load.
SSD and storage upgrade
Most configurations of the PCSpecialist Fusion 16 have two M.2 slots, so a second SSD can be added, or the existing one cloned to a larger drive.
Price confirmed before work starts
Memory upgrade
Most configurations of the PCSpecialist Fusion 16 have SODIMM memory slots, so memory can be increased. We check what is fitted and the maximum the board supports.
Graphics repair
The graphics chip is soldered to the board. Artefacts, crashes under load and a black screen with the fans running are diagnosed to the chip, its memory or its power stage, and repaired at board level where it is economical.
Windows repair and reinstall
The PCSpecialist Fusion 16 shipped with Windows 11. We repair start-up faults, reinstall Windows cleanly with your files kept, and remove malware.
Battery replacement
A new internal battery is fitted and tested through a full charge and discharge. At this age, short runtime and sudden shutdowns usually point to a worn battery and not a board fault.
Price confirmed before work starts
Charging port and power repair
Depending on the configuration this charges through a round socket, USB-C or both. We test the adapter, the port and the charging circuit to find which has failed.
We also carry out keyboard and trackpad repair, motherboard repair, liquid damage repair, hinge and casing repair, virus removal on the PCSpecialist Fusion 16, along with USB, HDMI and audio port repair, Wi-Fi and Bluetooth card replacement, webcam and speaker faults, BIOS password removal with proof of ownership and data transfer to a new machine.
Notes from the workshop
- PCSpecialist laptops are built on Clevo and Tongfang chassis. The chassis code on the base label is what we match parts to.
- Most have two memory slots and two M.2 slots.
- Thermal servicing is routine on the gaming models.
Data recovery from the PCSpecialist Fusion 16
The SSD in the PCSpecialist Fusion 16 can be removed and imaged on our own equipment, so files can usually be recovered even when the machine will not start. Recent Windows machines often have device encryption or BitLocker switched on. If so we will need the recovery key, which is normally saved in your Microsoft account.
Estimate the cost with our data recovery calculator, or read about recovering files after a ransomware attack.
Where the PCSpecialist Fusion 16 sits in the range
Its nearest relatives in the PCSpecialist laptops range are the newer PCSpecialist Recoil 16 (2023). It is the earliest 16-inch model of the range that we list.
Questions
Can the SSD or memory in the PCSpecialist Fusion 16 be upgraded?
The SSD can be replaced, and most configurations have a second M.2 slot. Memory is in slots on most configurations and can be increased.
My PCSpecialist Fusion 16 will not turn on. Is my data lost?
Usually not. The drive is separate from the fault in most cases, and we can remove it and copy your files even if the machine itself is not worth repairing.
Can the PCSpecialist Fusion 16 run Windows 11?
Yes. It shipped with Windows 11.
How do I get my PCSpecialist Fusion 16 to you?
Bring it to our workshop at Unit 1 The Willows, 80 Willow Walk, London SE1 5SY, or call 020 7237 6805 to ask about courier collection. We confirm the price before any work starts.