This page sets out the repairs, upgrades and data recovery we carry out on the Panasonic Toughpad FZ-G1, with notes on what tends to go wrong and what can and cannot be upgraded. The Panasonic Toughpad FZ-G1 is a 2016 tablet PC with a 10.1-inch screen. Both the drive and, on most configurations, the memory can be upgraded, which makes it a good candidate for a refresh.
- Model number
- FZ-G1
- Released
- 2016
- Type
- Tablet PC
- Screen
- 10.1-inch
- Storage
- 2.5-inch SATA drive
- Memory
- SODIMM slots
What we repair on the Panasonic Toughpad FZ-G1
Touchscreen replacement
The 10.1-inch touchscreen is bonded to its glass, so cracked glass, dead touch and display faults are all fixed by replacing the bonded panel.
Price confirmed before work starts
SSD and storage upgrade
The Panasonic Toughpad FZ-G1 uses a 2.5-inch SATA drive. Replacing a hard drive with an SSD is the biggest speed improvement available for a machine of this age.
Price confirmed before work starts
Memory upgrade
Most configurations of the Panasonic Toughpad FZ-G1 have SODIMM memory slots, so memory can be increased. We check what is fitted and the maximum the board supports.
Windows repair and reinstall
This model does not meet Microsoft’s Windows 11 requirements, and Windows 10 reached end of support in October 2025. We can advise on the realistic options, including a lightweight Linux or ChromeOS Flex installation.
Battery replacement
The battery is glued in behind the display. Replacing it means opening the device, which we explain and price before starting. At this age, short runtime and sudden shutdowns usually point to a worn battery and not a board fault.
Price confirmed before work starts
Keyboard and trackpad repair
The detachable keyboard cover is a separate accessory. We test whether a typing fault is the cover or the connector on the tablet.
Charging port and power repair
The round charging socket wears and works loose. On most configurations it is a separate part on a short cable and is replaced without motherboard work.
We also carry out motherboard repair, liquid damage repair, overheating and fan repair, hinge and casing repair, virus removal on the Panasonic Toughpad FZ-G1, along with USB, HDMI and audio port repair, Wi-Fi and Bluetooth card replacement, webcam and speaker faults, BIOS password removal with proof of ownership and data transfer to a new machine.
Notes from the workshop
- Toughbooks are sealed against dust and water, and those seals need to go back correctly after a repair.
- Many are ex-fleet machines with BIOS passwords set; we ask for proof of ownership.
Data recovery from the Panasonic Toughpad FZ-G1
The Panasonic Toughpad FZ-G1 has a 2.5-inch drive that we remove and image on our own equipment. If the drive is clicking or was dropped, stop powering it on: each attempt can do more damage.
Estimate the cost with our data recovery calculator, or read about recovering files after a ransomware attack.
Where the Panasonic Toughpad FZ-G1 sits in the range
Its nearest relatives in the Panasonic Toughbook range are the older Panasonic Toughbook CF-19 (2012) and the newer Panasonic Toughbook CF-20 (2017).
Questions
Can the SSD or memory in the Panasonic Toughpad FZ-G1 be upgraded?
The 2.5-inch drive can be replaced with an SSD. Memory is in slots on most configurations and can be increased.
My Panasonic Toughpad FZ-G1 will not turn on. Is my data lost?
Usually not. The drive is separate from the fault in most cases, and we can remove it and copy your files even if the machine itself is not worth repairing.
Is a 2016 Panasonic Toughpad FZ-G1 still worth repairing?
It depends on the fault. A battery, SSD or charging socket is usually worth doing. A major board repair on an older machine may cost more than the machine is worth, and if that is the case we will say so.
Where do I find the model number on my tablet PC?
The model name or number is on the label on the underside or back of the machine. For this model, look for FZ-G1.