This page sets out the repairs, upgrades and data recovery we carry out on the Gigabyte G7 MD, with notes on what tends to go wrong and what can and cannot be upgraded. The Gigabyte G7 MD is a 2021 gaming laptop with a 17.3-inch screen. Both the drive and, on most configurations, the memory can be upgraded, which makes it a good candidate for a refresh.
- Model number
- G7 MD
- Released
- 2021
- Type
- Gaming laptop
- Screen
- 17.3-inch
- Storage
- M.2 SSD, two slots on most configurations
- Memory
- SODIMM slots
Repairs we carry out on the Gigabyte G7 MD
Screen replacement
The 17.3-inch panel is matched to the original by part number, including refresh rate and connector type, so games run as they did before.
Price confirmed before work starts
Memory upgrade
Most configurations of the Gigabyte G7 MD have SODIMM memory slots, so memory can be increased. We check what is fitted and the maximum the board supports.
Graphics repair
The graphics chip is soldered to the board. Artefacts, crashes under load and a black screen with the fans running are diagnosed to the chip, its memory or its power stage, and repaired at board level where it is economical.
Windows repair and reinstall
The Gigabyte G7 MD meets Microsoft’s Windows 11 requirements in most configurations. We upgrade from Windows 10, which reached end of support in October 2025, or reinstall Windows 11 cleanly with your files kept.
Battery replacement
The battery is internal and held by screws. We fit a new one, then calibrate and test it under load. A battery of this age that swells should be replaced before it damages the trackpad or casing.
Price confirmed before work starts
Charging port and power repair
Depending on the configuration this charges through a round socket, USB-C or both. We test the adapter, the port and the charging circuit to find which has failed.
Overheating and fan repair
We strip the cooling system, clean the fans and heatsink fins and renew the thermal compound and pads. We check temperatures under load afterwards.
SSD and storage upgrade
Most configurations of the Gigabyte G7 MD have two M.2 slots, so a second SSD can be added, or the existing one cloned to a larger drive.
Price confirmed before work starts
We also carry out keyboard and trackpad repair, motherboard repair, liquid damage repair, hinge and casing repair, virus removal on the Gigabyte G7 MD, along with USB, HDMI and audio port repair, Wi-Fi and Bluetooth card replacement, webcam and speaker faults, BIOS password removal with proof of ownership and data transfer to a new machine.
Notes from the workshop
- Aero and AORUS laptops are thin for their power and need regular thermal servicing.
- Most have two memory slots and two M.2 slots.
Data recovery from the Gigabyte G7 MD
The SSD in the Gigabyte G7 MD can be removed and imaged on our own equipment, so files can usually be recovered even when the machine will not start. Recent Windows machines often have device encryption or BitLocker switched on. If so we will need the recovery key, which is normally saved in your Microsoft account.
Estimate the cost with our data recovery calculator, or read about recovering files after a ransomware attack.
Where the Gigabyte G7 MD sits in the range
Its nearest relatives in the Gigabyte Aero, AORUS and G Series range are the older Gigabyte Aero 17 HDR XB (2020) and the newer Gigabyte Aero 17 XE5 (2022).
Questions
Can the SSD or memory in the Gigabyte G7 MD be upgraded?
The SSD can be replaced, and most configurations have a second M.2 slot. Memory is in slots on most configurations and can be increased.
My Gigabyte G7 MD will not turn on. Is my data lost?
Usually not. The drive is separate from the fault in most cases, and we can remove it and copy your files even if the machine itself is not worth repairing.
How much does a Gigabyte G7 MD screen replacement cost?
Price confirmed before work starts. The exact figure depends on the part your machine needs, and we confirm it before any work starts.
Where do I find the model number on my gaming laptop?
The model name or number is on the label on the underside or back of the machine.