If your Gigabyte G5 MD has a broken screen, will not charge, runs hot or will not start, we can diagnose and repair it at our Bermondsey workshop. The Gigabyte G5 MD is a 2021 gaming laptop with a 15.6-inch screen. Both the drive and, on most configurations, the memory can be upgraded, which makes it a good candidate for a refresh.
- Model number
- G5 MD
- Released
- 2021
- Type
- Gaming laptop
- Screen
- 15.6-inch
- Storage
- M.2 SSD, two slots on most configurations
- Memory
- SODIMM slots
Repairs we carry out on the Gigabyte G5 MD
Screen replacement
The 15.6-inch panel is matched to the original by part number, including refresh rate and connector type, so games run as they did before.
Price confirmed before work starts
Charging port and power repair
We replace worn charging sockets and repair USB-C ports and charging circuits at component level. The adapter is tested first, because it is the cheapest thing to be wrong.
Overheating and fan repair
A thermal service covers fresh compound on the processor and graphics chip, new thermal pads where needed and both fans cleaned. It is the usual cure for throttling and loud fans under load.
SSD and storage upgrade
Most configurations of the Gigabyte G5 MD have two M.2 slots, so a second SSD can be added, or the existing one cloned to a larger drive.
Price confirmed before work starts
Memory upgrade
Most configurations of the Gigabyte G5 MD have SODIMM memory slots, so memory can be increased. We check what is fitted and the maximum the board supports.
Graphics repair
The graphics chip is soldered to the board. Artefacts, crashes under load and a black screen with the fans running are diagnosed to the chip, its memory or its power stage, and repaired at board level where it is economical.
Windows repair and reinstall
The Gigabyte G5 MD meets Microsoft’s Windows 11 requirements in most configurations. We upgrade from Windows 10, which reached end of support in October 2025, or reinstall Windows 11 cleanly with your files kept.
Battery replacement
A new internal battery is fitted and tested through a full charge and discharge. A battery of this age that swells should be replaced before it damages the trackpad or casing.
Price confirmed before work starts
We also carry out keyboard and trackpad repair, motherboard repair, liquid damage repair, hinge and casing repair, virus removal on the Gigabyte G5 MD, along with USB, HDMI and audio port repair, Wi-Fi and Bluetooth card replacement, webcam and speaker faults, BIOS password removal with proof of ownership and data transfer to a new machine.
What we see on the bench
- Most have two memory slots and two M.2 slots.
- Aero and AORUS laptops are thin for their power and need regular thermal servicing.
Data recovery from the Gigabyte G5 MD
The SSD in the Gigabyte G5 MD can be removed and imaged on our own equipment, so files can usually be recovered even when the machine will not start. Recent Windows machines often have device encryption or BitLocker switched on. If so we will need the recovery key, which is normally saved in your Microsoft account.
Estimate the cost with our data recovery calculator, or read about recovering files after a ransomware attack.
Where the Gigabyte G5 MD sits in the range
Its nearest relatives in the Gigabyte Aero, AORUS and G Series range are the older Gigabyte Aero 15 OLED XB (2020) and the newer AORUS 15 XE4 (2022).
Questions
Can the SSD or memory in the Gigabyte G5 MD be upgraded?
The SSD can be replaced, and most configurations have a second M.2 slot. Memory is in slots on most configurations and can be increased.
My Gigabyte G5 MD will not turn on. Is my data lost?
Usually not. The drive is separate from the fault in most cases, and we can remove it and copy your files even if the machine itself is not worth repairing.
How much does a Gigabyte G5 MD screen replacement cost?
Price confirmed before work starts. The exact figure depends on the part your machine needs, and we confirm it before any work starts.
Where do I find the model number on my gaming laptop?
The model name or number is on the label on the underside or back of the machine.