Acer Nitro 5 AN515-42 repair in London: bring it to our workshop in Bermondsey or ask about courier collection, and we will confirm a price before any work starts. It is a 15.6-inch gaming laptop from 2018. Both the drive and, on most configurations, the memory can be upgraded, which makes it a good candidate for a refresh.
- Model number
- AN515-42
- Released
- 2018
- Type
- Gaming laptop
- Screen
- 15.6-inch
- Storage
- M.2 SSD, two slots on most configurations
- Memory
- SODIMM slots
What we repair on the Acer Nitro 5 AN515-42
Screen replacement
The 15.6-inch panel is matched to the original by part number, including refresh rate and connector type, so games run as they did before.
Price confirmed before work starts
Memory upgrade
Most configurations of the Acer Nitro 5 AN515-42 have SODIMM memory slots, so memory can be increased. We check what is fitted and the maximum the board supports.
Graphics repair
The graphics chip is soldered to the board. Artefacts, crashes under load and a black screen with the fans running are diagnosed to the chip, its memory or its power stage, and repaired at board level where it is economical.
Windows repair and reinstall
The Acer Nitro 5 AN515-42 meets Microsoft’s Windows 11 requirements in most configurations. We upgrade from Windows 10, which reached end of support in October 2025, or reinstall Windows 11 cleanly with your files kept.
Battery replacement
The battery is internal and held by screws. We fit a new one, then calibrate and test it under load. On a 2018 machine a worn battery is the likely cause of short runtime, and we measure its capacity before recommending anything else.
Price confirmed before work starts
Charging port and power repair
We replace worn charging sockets and repair USB-C ports and charging circuits at component level. The adapter is tested first, because it is the cheapest thing to be wrong.
Overheating and fan repair
We strip the cooling system, clean the fans and heatsink fins and renew the thermal compound and pads. We check temperatures under load afterwards.
SSD and storage upgrade
Most configurations of the Acer Nitro 5 AN515-42 have two M.2 slots, so a second SSD can be added, or the existing one cloned to a larger drive.
Price confirmed before work starts
We also carry out keyboard and trackpad repair, motherboard repair, liquid damage repair, hinge and casing repair, virus removal on the Acer Nitro 5 AN515-42, along with USB, HDMI and audio port repair, Wi-Fi and Bluetooth card replacement, webcam and speaker faults, BIOS password removal with proof of ownership and data transfer to a new machine.
Notes from the workshop
- Thermal servicing is the most common job: dried compound and dust lead to throttling.
- The Nitro 5 has two memory slots and usually two M.2 slots plus a 2.5-inch bay that needs a cable kit.
Data recovery from the Acer Nitro 5 AN515-42
The SSD in the Acer Nitro 5 AN515-42 can be removed and imaged on our own equipment, so files can usually be recovered even when the machine will not start.
Estimate the cost with our data recovery calculator, or read about recovering files after a ransomware attack.
Where the Acer Nitro 5 AN515-42 sits in the range
Its nearest relatives in the Acer Nitro range are the older Acer Nitro 5 AN515-51 (2017) and the newer Acer Nitro 5 AN515-54 (2019).
Questions
Can the SSD or memory in the Acer Nitro 5 AN515-42 be upgraded?
The SSD can be replaced, and most configurations have a second M.2 slot. Memory is in slots on most configurations and can be increased.
My Acer Nitro 5 AN515-42 will not turn on. Is my data lost?
Usually not. The drive is separate from the fault in most cases, and we can remove it and copy your files even if the machine itself is not worth repairing.
Why does my Acer Nitro 5 AN515-42 overheat or slow down in games?
Usually dust in the heatsinks and thermal compound that has dried out. A thermal service fixes it in most cases. If temperatures are normal and it still slows down, we test the graphics chip and power delivery.
How much does a Acer Nitro 5 AN515-42 screen replacement cost?
Price confirmed before work starts. The exact figure depends on the part your machine needs, and we confirm it before any work starts.